0591-286710710591-28888128
18gsm Nylon Multifilament Reinforced Mesh — Ultra-Light Soft Netting for Bridal Veils and Delicate Linings | 69 Inch
How does it feel?
18gsm nylon multifilament reinforced mesh. This is a soft one. You touch it and it feels almost silky — not scratchy, not stiff, not rough. The multifilament yarn is made of multiple ultra-fine nylon strands twisted together, so the surface is smooth and gentle against the skin. It's light as air — 18gsm, barely there. But the reinforced weave gives it just enough structure that it doesn't collapse into a shapeless cloud. 175cm wide, 32 yards per kilo. Extra-wide, extra-efficient. If you've used our monofilament or double-thread meshes and found them too crisp or firm, this is the softer alternative. Light as a whisper, soft as silk.
Is it tough? Does it last?
It's 18gsm — let's be real, it's not built for heavy use. But the reinforced weave gives it better tear resistance than standard soft mesh at this weight. Nylon has natural give, so it doesn't shatter the moment you pull it. Handle it with a light touch when cutting and sewing. Once it's in place as a veil, overlay, or lining, it holds up fine. Won't shrink, won't wrinkle much, comes out of the wash looking the same. Not for pieces that need to hold heavy structure. This one's for floating softly, not fighting.
What can I make with it?
Bridal veils that drift like mist. Soft gown overlays that move with the bride. Delicate garment linings that feel smooth against the skin. Children's soft tulle dresses that won't itch or scratch. Craft projects where you want a fabric that's gentle and airy. If you need more structure for pettiskirts and gown support, our double-thread or stiff square meshes are the better choice. This one's for when you want lightweight with a soft touch — gentle enough to wear next to the skin, light enough to float on air.
FAQ
1. What does "multifilament" mean? How is it different from monofilament mesh?
Multifilament yarn is made of multiple ultra-fine nylon strands twisted together into one thread. Monofilament yarn is a single strand. The result: multifilament mesh is softer, smoother, and more fabric-like — it drapes better and doesn't feel scratchy. Monofilament mesh is crispyer and more structured. If you want soft and silky against the skin, go multifilament. If you want firm and structured, go monofilament.
2. How is this different from your 20gsm nylon double-thread American mesh?
Structure and feel. The 20gsm double-thread mesh has two yarns woven side by side — it's built for backbone and shape retention. This 18gsm multifilament reinforced mesh is softer, drapier, and less structured. Both are lightweight nylon options. Pick double-thread for structure and volume. Pick multifilament for softness and fluidity.
3. How is this different from your 17gsm nylon high-density American mesh H?
The H-series has a tighter weave with smaller holes — it's built for a refined, controlled look. This multifilament reinforced mesh has a more open weave with a softer hand feel. Both are lightweight. Pick H-series for precision and tightness. Pick multifilament for softness and a more gentle drape.
4. 175cm wide — is that wider than your other meshes?
Yes, 175cm is one of our wider widths. Most of our meshes are in the 150-160cm range. This extra width gives you more flexibility for cutting — fewer seams, less waste, more efficient production. Good for large veils, wide overlays, and volume production where every inch of fabric counts.
5. 18gsm — how do you handle something this light?
Gently, but the reinforced weave gives it a bit more stability than standard soft mesh. Nylon has more give than polyester, so it doesn't slip and slide as much. Lay it flat when cutting — don't stretch it out. Use tissue paper under the fabric when sewing delicate seams — it stabilizes the fabric and tears away clean when you're done. The soft hand actually helps — it stays where you put it instead of fighting you. Once you get used to the weight, it handles fine.
6. Is this see-through? Do I need a lining?
It's sheer — at 18gsm, that's the point. It's made for layering, not for full coverage on its own. For veils, overlays, and soft linings, the sheerness is exactly what you want. If you're making a garment with this as the main fabric, you'll want something underneath.
7. Can I use this for a wedding dress pettiskirt?
Not ideal. This multifilament mesh is soft and flowy — it doesn't have the structural backbone needed for a pettiskirt that needs to hold volume. For pettiskirts and gown support, our double-thread American mesh or stiff square mesh are much better choices. This one's for veils, soft overlays, and delicate linings — pieces that need to flow, not stand up.
8. 32 yards per kilo — is that a good yield?
Excellent. At 18gsm, one kilo produces a generous 32 yards. Combined with the 175cm extra width, this is a very efficient fabric for volume production — more coverage per dollar. If you're running large orders for veils, overlays, or soft linings, this fabric keeps your material costs lean.
9. Is this fabric suitable for medical or healthcare applications?
No. Our fabrics are designed and produced for apparel, bridal, millinery, and craft uses. We do not currently manufacture or supply fabrics for medical, filtration, or industrial applications. If you need medical-grade textiles, we recommend consulting a specialist supplier.