0591-286710710591-28888128
25gsm Polyester Reinforced Mesh — Lightweight Structured Netting for Bridal Pettiskirts and Millinery | 63 Inch
How does it feel?
25gsm polyester reinforced mesh. Light — you pick it up and barely feel the weight. But the reinforced weave gives it a surprising amount of backbone. It's stiffer and more structured than standard mesh. Not floppy at all. Where the 21gsm nylon reinforced mesh is soft and flexible, this polyester version is crisp and firm. It holds its shape. It doesn't collapse. 63 inches wide, 13 yards per kilo. The lower yield compared to the nylon version tells you the weave is denser — more material packed into every meter. Polyester gives it a drier, crispier hand with a clean matte finish. If you've used the nylon version and wanted something with more structure and a firmer hand, this is your upgrade.
Is it tough? Does it last?
The reinforced weave makes a real difference here. Better tear resistance and dimensional stability than standard mesh at the same weight. Polyester holds its shape, resists wrinkles, and won't shrink in the wash. The crispness stays — it won't soften or lose its structure over time. Cuts cleanly with minimal fraying, feeds evenly through the machine. For bridal pettiskirts, gown structuring, and craft pieces that need to hold their silhouette through a long event, it's reliable. Not built for heavy-duty structural work like costume frames — for that, you'd want our 50gsm or 85gsm stiff square mesh. But for what it's made for, it does the job with confidence.
What can I make with it?
Bridal pettiskirts that need lightweight volume without collapsing. Gown structuring and interlinings that need support without weight. Fascinator bases and millinery pieces. Craft flowers and decorative projects where the fabric needs to hold its shape. If you need something softer and more flexible, the 21gsm nylon reinforced mesh is the lighter alternative. If you need maximum rigidity, our polyester stiff square mesh goes up to 85gsm. This one's for when you want lightweight with a firm hand — structured enough to hold a silhouette, light enough to float.
FAQ
1. How is this different from your 21gsm nylon reinforced mesh?
Fiber and density. The 21gsm nylon version is softer, more flexible, and has a higher yield at 29 yards per kilo. This 25gsm polyester version is stiffer, denser, and has a lower yield at 13 yards per kilo — the tighter weave gives it more backbone and structure. Nylon drapes. Polyester holds. Pick nylon for soft support, polyester for firm structure.
2. How is this different from your 28gsm polyester reinforced mesh?
Weight and purpose. The 28gsm version is slightly heavier and even more structured — better for pieces that need maximum stability. This 25gsm version is a touch lighter and more flexible, while still being noticeably stiffer than standard mesh. If the 28gsm feels like more than you need, this 25gsm is the lighter alternative with the same polyester crispness.
3. 25gsm — how do you handle something this light?
Easier than you'd expect. The reinforced weave gives it more stability on the cutting table than standard open mesh. Polyester has less give than nylon, so it doesn't slip and slide. Lay it flat when cutting. Don't yank it through the machine. The crisp hand actually helps — it stays where you put it instead of shifting around. Once you get used to the weight, it handles like any lightweight structured fabric.
4. Is this see-through? Do I need a lining?
It's sheer — at 25gsm, that's the point. It's made for layering, not for full coverage on its own. For pettiskirts and gown interlinings, it's meant to be hidden between layers of fabric. If you're using it as an outer layer for a veil or decorative piece, the sheerness is part of the look.
5. Can I use this for a wedding dress pettiskirt?
Yes, that's one of its primary uses. The reinforced structure gives it enough body to hold a skirt silhouette without needing heavy or bulky layers underneath. It's light enough that the bride won't feel weighed down, but structured enough to create real volume. For ball gown or cathedral skirts, multiple layers may be needed. For A-line or softer silhouettes, one or two layers is often enough.
6. 13 yards per kilo — why is the yield lower than the nylon version?
The weave is denser. More yarn is packed into every meter of this polyester reinforced mesh compared to the nylon version. That means more structure, more crispness, more backbone — and less yardage per kilo. The lower yield is a sign of density and durability. If you need lightweight coverage over a large area, the 21gsm nylon version is more efficient. If you need structure and firmness, the lower yield is worth it.
7. Is this fabric suitable for medical or healthcare applications?
No. Our fabrics are designed and produced for apparel, bridal, millinery, and craft uses. We do not currently manufacture or supply fabrics for medical, filtration, or industrial applications. If you need medical-grade textiles, we recommend consulting a specialist supplier.